AXE10 www.axtal.com wasemweg 5 page 1(2) fon: +49 (6261) 939834 d-74821 mosbach fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXE10 issue: 03 date: 2005-06-08 oscillator type : smd pxo (clock) in co 26 package parameter min. typ. max. unit condition frequency range 1.544 125 mhz standard frequencies mhz frequency stability -25 25 ppm overall (note 1) initial tolerance 5 ppm vs. temperature in operating temperatur e range (steady state) ppm -10~+70c vs. supply voltage variation 3 ppm v s 5% vs. load change 1 ppm load 5% long term (aging) 1 st year 1 ppm @ +40c frequency adjustment range electronic frequency control (efc) range ppm n.a. rf output signal waveform hcmos/ttl output signal high v oh 2.4 v s - 0.5v v v ttl load (fan-out 2) hcmos load 15 pf output signal low v ol 0.4 0.5 v v ttl load (fan-out 2) hcmos load 15 pf rise & decay time 10 ns according to logic family symmetry (duty cycle) 40 60 % @ v s /2 start-up time 10 ms supply voltage v s 3.13 4.75 3.3 5.0 3.47 5.25 v option ?33? option ?50? current consumption (steady state) 15 10 85 45 ma ma option ?33? option ?50? operating temperature range -10 +70 c operable temperature range -40 +85 c storage temperature range -40 +85 c enclosure (see drawing) (lxwxh) 14.4x9.5x6 max mm iec 61837 co 26 weight 3 gram packing tape & reel iec 60286-3 esd sensitivity 1500 v hbm as in iec 61000-4-2 notes: 1. frequency stability = initial tolerance + stability vs. temperature 2. absolute pull range (apr) = efc range - temperature stability - supply & load change ? aging 3. terminology and test conditions are according to iec standard iec60679-1, unless otherwise stated ordering code: model (specification) option frequency [mhz] AXE10 50 24.576
AXE10 www.axtal.com wasemweg 5 page 2(2) fon: +49 (6261) 939834 d-74821 mosbach fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections pin # symbol function 1 n.c. no connection 2* n.c. no connection 3 gnd ground 4 rf out rf output 5* n.c. optional 6 vs supply voltage * note: pins 2 and 5 may not be present environmental conditions test iec 60068 part ... iec 60679-1 clause ... test conditions visual inspection, dimensions 4.3 enclosure styles as in iec 60679-3 or 61837, if applicable sealing tests (if applicable) 2-17 4.6.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 4.6.3 test ta (235 5)c method 1 test tb method 1a, 5s shock* 2-27 4.6.8 test ea, 3 x per axes 100g, 6 ms half-sine pulse bump* 2-29 4.6.6 test eb, 4000 bumps per axes, 40g, 6 ms free fall* 2-32 4.6.9 test ed procedure 1, 2 drops from 1m height vibration, sinusoidal* 2-6 4.6.7 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g rapid change of temperature 2-14 4.6.5 test na, 10 cy cles at extremes of operating temperature range dry heat 2-2 4.6.14 test ba, 16 h at upper temperature indicated by climatic category damp heat, cyclic* 2-30 4.6.15 test db variant 1 severity b), 55c/95% r.h., 6 cycles cold 2-1 4.6.16 test aa, 2 h at lower temperature indicated by climatic category climatic sequence* 1-7 4.6.17 sequence of 4.6.14, 4.6.15 (1 st cycle), 4.6.16, 4.6.15 (5 cycles) damp heat, steady state* 2-3 4.6.18 test ca, 56 days endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c
|